Optional Inspection SW Packages and Spare Parts for ISONIC 2001 ABIScan - Enhanced Rapid B-Scan Recording and Imaging (SWA 99C0901), Complete Raw Data Capturing Order Code: SWA 99C0901 Continuous measuring of echo amplitudes and reflectors coordinates along probe trace Time-based (real time clock) and true-to-location (built-in incremental encoder interface) modes of data recording Recording of complete sequence of A-Scans along with B-Scan defects images a Off-line evaluation of B-Scan record images featured with: Sizing of defects at any location along stored image – coordinates and projection size Play-back and evaluation of A-Scans obtained during B-Scan imaging and recording Echodynamic pattern analysis Defects outlining and pattern recognition based on A-Scan sequence analysis DAC / DGS B-Scan normalization Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: SK 2001108 ABI or SK 2001108 FM or other encoder Probe Holders for Probes to Be Used for Inspection S 904050 may be required FLOORMAP-L - Fast Tank Floor / Shell Inspection for Pitting and Deep Corrosion Damages - Linear Scanning with On-Line Image Reconstruction, Complete Raw Data Capturing Order Code: SWA 99C033 Continuous measuring of echo amplitudes and reflectors coordinates along probe trace Time-based (real time clock) and true-to-location (built-in incremental encoder interface) modes of data recording Recording of complete sequence of A-Scans along with CB-Scan defects images Off-line evaluation of CB-Scan record images featured with: Sizing of defects at any location along stored image – coordinates and projection size Play-back and evaluation of A-Scans obtained during CB-Scan imaging and recording Echodynamic pattern analysis Defects outlining and pattern recognition based on A-Scan sequence analysis DAC / DGS CB-Scan normalization Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: SK 2001108 FM or other encoder Probe Holders for Shear Wave, Surface Wave, Guided Wave Probes to Be Used for Weld Inspection if not S 544… probes that are already equipped with encoder fitting clamp S 904050 may be required EasyTOFD – TOFD Inspection, Complete Raw Data Capturing Order Code: SWA 996019 True-to-location (mechanical encoder) mode of data recording Averaging A-Scans whilst recording as per operator's selection Recording of complete sequence of A-Scans along with TOFD map Off-line evaluation of TOFD Map featured with: Improvement of near to surface resolution through removal of lateral wave and back echo records from TOFD Map Linearization and straightening of TOFD Map Increasing contrast of TOFD images through rectification A-Scan sequence analysis Defects pattern recognition and sizing Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: SK 2001108 FM or other encoder S 450000 S 904050 I2-SONIC - Inspection of Planar Butt Joints, Scanning from One Side, Complete Raw Data Capturing Order Code: SWA 996000 a Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Area) Showing of Actually Implemented Probe Trace C-Scan (Top View of Weld and Heat Affected Zone either Global or Sliced - switcheable) B-Scan (Side View of Weld and Heat Affected Zone either Global or Sliced - switcheable) D-Scan (End View of Weld and Heat Affected Zone either Global or Sliced - switcheable) Versatile Color Palette for Defects Imaging Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B> S 4050 or S 4050 HT AND/OR S 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Angle Beam Probes to Be Used for Weld Inspection Optional Accessories: S 4010 S 799028 or S 799028 HT SWA 996014 PLCROSS - Inspection of Planar Butt Joints, Scanning from Both Sides, Complete Raw Data Capturing Order Code: SWA 996003 Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Areas) Showing of Actually Implemented Probe Trace C-Scan (Top View of Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides B-Scan (Side View of Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides D-Scan (End View of the Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides Versatile Color Palette for Defects Imaging Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B> S 4050 or S 4050 HT AND/OR S 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Angle Beam Probes to Be Used for Weld Inspection> S 904050 Optional Accessories: S 4010 S 799028 or S 799028 HT SWA 996014 CIRCROSS - Inspection of Circumferential or Spiral Butt Joints, Scanning from Both Sides, Complete Raw Data Capturing, weld diameters 400 mm and above Order Code: SWA 996004 Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Areas) Showing of Actually Implemented Probe Trace C-Scan (Unfolded Top View of Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides B-Scan (Unfolded Side View of Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides D-Scan (End View of the Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides Versatile Color Palette for Defects Imaging Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B S 4050 or S 4050 HT AND/OR S 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Angle Beam Probes to Be Used for Weld Inspection S 904050 Optional Accessories: S 4010 S 799028 or S 799028 HT SWA 996014 SM_PIPE - Inspection of Butt Welds between Small Diameter Pipes (80 to 800 mm), Scanning from One Side, Complete Raw Data Capturing Order Code: SWA 996005 Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Areas) Showing of Actually Implemented Probe Trace C-Scan (Unfolded Top View of Weld and Heat Affected Zone either Global or Sliced - switcheable) B-Scan (Unfolded Side View of Weld and Heat Affected Zone either Global or Sliced - switcheable) B-Scan (Real Shape Side View of Weld and Heat Affected Zone either Global or Sliced - switcheable) D-Scan (End View of Weld and Heat Affected Zone either Global or Sliced - switcheable) Versatile Color Palette for Defects Imaging Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B S 4050 or S 4050 HT AND/OR S 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Angle Beam Probes to Be Used for Weld Inspection S 89000 Optional Accessories: S 4010 S 799028 or S 799028 HT S 86000 SWA 996014 LONGWELD - Inspection of Longitudinal Welds In Pipes, diameter 300 mm - 4000 mm, Scanning from Both Sides, Complete Raw Data Capturing Order Code: SWA 996C052 Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Areas) Showing of Actually Implemented Probe Trace C-Scan (Top View of Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides B-Scan (Side View of Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides D-Scan (End View of the Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides Versatile Color Palette for Defects Imaging Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B S 4050 or S 4050 HT AND/OR S 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Angle Beam Probes to Be Used for Weld Inspection S 904050 Optional Accessories: S 4010 S 799028 or S 799028 HT SWA 996014 TRANSCAN - Inspection of Butt Joints for Defects Transversal to Weld Scanning from Both Sides and/or Above Machined Weld Enforcement (Standard HP 5/3) Order Code: SWA 996006 Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Areas) Showing of Actually Implemented Probe Trace C-Scan (Top View of Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides B-Scan (Side View of Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides D-Scan (End View of the Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides Versatile Color Palette for Defects Imaging Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B S 4050 or S 4050 HT S 70010 or S 70010 HT > Probe Holders for Angle Beam Probes to Be Used for Weld Inspection S 904050 Optional Accessories: S 4010 S 799028 or S 799028 HT SWA 996014 EXPERT – High Resolution Scanning of Welds (Frontal Resolution - 0.25 mm / 0.01"), Scanning from One Side, Complete Raw Data Capturing Order Code: SWA 996009 Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Areas) Showing of Actually Implemented Probe Trace C-Scan (Top View of Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides B-Scan (Side View of Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides D-Scan (End View of the Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides Defect Outlining Technology (DOT) - Extra-Capturing of A-Scan Sequencies for Weld Cross Sections selected by Operator Whilst Scanning Versatile Color Palette for Defects Imaging Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B S 4050 or S 4050 HT AND/OR S 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Angle Beam Probes to Be Used for Weld Inspection S 86000 Optional Accessories: S 4010 S 799028 or S 799028 HT SWA 996014 NOZZLE – Inspection of Nozzle Welds, Scanning from One Side, Complete Raw Data Capturing Order Code: SWA 996011 Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Areas) Showing of Actually Implemented Probe Trace C-Scan (Top View of Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides B-Scan (Side View of Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides D-Scan (End View of the Weld and Heat Affected Zone either Global or Sliced - switcheable) / superimposing images obtained whilst scanning from different sides Versatile Color Palette for Defects Imaging Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B S 4050 or S 4050 HT AND/OR S 4060 or S 4060 HTS 70010 or S 70010 HT Probe Holders for Angle Beam Probes to Be Used for Weld Inspection S 904050 Optional Accessories: S 4010 S 799028 or S 799028 HT SWA 996014 S 86000 TOFD – TOFD Inspection, Complete Raw Data Capturing Order Code: SWA 996010 Averaging A-Scans whilst recording as per operator's selection Recording of complete sequence of A-Scans along with TOFD map Off-line evaluation of TOFD Map featured with: Improvement of near to surface resolution through removal of lateral wave and back echo records from TOFD Map Linearization and straightening of TOFD Map Increasing contrast of TOFD images through rectification A-Scan sequence analysis u Defects pattern recognition and sizing Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B 4060 or S 4060 HTS 70010 or S 70010 HT S 450000 S 799017 CORROMAP – Inspection with Straight Beam Ultrasonic Probes for Corrosion Mapping Order Code: SWA 996008 Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging Thickness / Corrosion Map Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging of Thickness / Corrosion Map FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognitiona Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Area) Showing of Actually Implemented Probe Trace C-Scan (Top View - Thickness / Corrosion Map either Global or Sliced - switcheable) B-Scan (Side View - Thickness / Corrosion Profile either Global or Sliced - switcheable) D-Scan (End View - Thickness / Corrosion Profile either Global or Sliced - switcheable) Versatile Color Palette for Thickness / Corrosion Mapping Postprocessing :Sizing of defects; Statistical Analysis; Slicing and Filtering Images Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Straight Beam Probes to Be Used for Inspection Optional Accessories: S 4010 S 799028 or S 799028 HT SWA 996014 CORROMAP RD – Inspection with Straight Beam Ultrasonic Probes for Corrosion Mapping, Complete Raw Data Capturing Order Code: SWA 996008 RD Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging Thickness / Corrosion Map Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging of Thickness / Corrosion Map FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognitiona Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Area) Showing of Actually Implemented Probe Trace C-Scan (Top View - Thickness / Corrosion Map either Global or Sliced - switcheable) B-Scan (Side View - Thickness / Corrosion Profile either Global or Sliced - switcheable) D-Scan (End View - Thickness / Corrosion Profile either Global or Sliced - switcheable) Versatile Color Palette for Thickness / Corrosion Mapping Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects; Gate Manipulation - Rebuild C-, B-, and D-Scan views for various Gate Settings; Statistical Analysis; Slicing and Filtering Images Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Straight Beam Probes to Be Used for Inspection Optional Accessories: S 4010 S 799028 or S 799028 HT SWA 996014 CORROMAP CU – Inspection with Sraight Beam Ultrasonic Probes for Corrosion Mapping - Scanning above Tubular or Quasi-Tubular Surface (Curvature Radius 40 - 400 mm) Order Code: SWA 996008 CU Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging Thickness / Corrosion Map Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging of Thickness / Corrosion Map FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Area) Showing of Actually Implemented Probe Trace C-Scan (Unfolded Top View - Thickness / Corrosion Map either Global or Sliced - switcheable) B-Scan (Unfolded Side View - Thickness / Corrosion Profile either Global or Sliced - switcheable) B-Scan (Real Shape Side View - Thickness / Corrosion Profile either Global or Sliced - switcheable) D-Scan (End View - Thickness / Corrosion Profile either Global or Sliced - switcheable) Versatile Color Palette for Thickness / Corrosion Mapping Postprocessing: Sizing of defects; Statistical Analysis; Slicing and Filtering Images Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Straight Beam Probes to Be Used for Inspection S 89000 Optional Accessories: S 4010 S 799028 or S 799028 HT SWA 996014 S86000 CORROMAP CU RD – Inspection with Sraight Beam Ultrasonic Probes for Corrosion Mapping - Scanning above Tubular or Quasi-Tubular Surface (Curvature Radius 40 - 400 mm), Complete Raw Data Capturing Order Code: SWA 996008 CU RD Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging Thickness / Corrosion Map Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging of Thickness / Corrosion Map FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Area) Showing of Actually Implemented Probe Trace C-Scan (Unfolded Top View - Thickness / Corrosion Map either Global or Sliced - switcheable) B-Scan (Unfolded Side View - Thickness / Corrosion Profile either Global or Sliced - switcheable) B-Scan (Real Shape Side View - Thickness / Corrosion Profile either Global or Sliced - switcheable) D-Scan (End View - Thickness / Corrosion Profile either Global or Sliced - switcheable) Versatile Color Palette for Thickness / Corrosion Mapping Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects; Gate Manipulation - Rebuild C-, B-, and D-Scan views for various Gate Settings; Statistical Analysis; Slicing and Filtering Images Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Straight Beam Probes to Be Used for Inspection S 89000 Optional Accessories: S 4010 S 799028 or S 799028 HT SWA 996014 S86000 MULTISCAN-COMBO - S Inspection with Straight Beam Single Element or Dual Ultrasonic Probes for Internal Defects with Tomographical and 3D Data Presentation and User Defined Mapping Scheme Order Code: SWA 996013 Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Area) Showing of Actually Implemented Probe Trace Pulse Echo Amplitude / Distance C-Scan (Top View of Scanning Area either Global or Sliced - switcheable) Pulse Echo B-Scan (Side View of the Scanning Area either Global or Sliced - switcheable) Pulse Echo D-Scan (End View of the Scanning Area either Global or Sliced - switcheable) Through Transmission / Back Echo Attenualtion Amplitude C-Scan (Top View of Scanning Area) Versatile Color Palette for Defects Imaging Postprocessing: Sizing of defects; Statistical Analysis; Slicing and Filtering Images a Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: 4030A or S 4030A HT S 2040 B 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Straight Beam Probes to Be Used for Inspection Optional Accessories: S 4010 S 799028 or S 799028 HT S86000 S 554230 AND/OR S 554231 AND/OR S 554232 AND/OR S 554233 MULTISCAN-COMBO - S RD Inspection with Straight Beam Single Element or Dual Ultrasonic Probes for Internal Defects with Tomographical and 3D Data Presentation and User Defined Mapping Scheme, Complete Raw Data Capturing Order Code: SWA 996013 RD Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Area) Showing of Actually Implemented Probe Trace Pulse Echo Amplitude / Distance C-Scan (Top View of Scanning Area either Global or Sliced - switcheable) Pulse Echo B-Scan (Side View of the Scanning Area either Global or Sliced - switcheable) Pulse Echo D-Scan (End View of the Scanning Area either Global or Sliced - switcheable) Through Transmission / Back Echo Attenualtion Amplitude C-Scan (Top View of Scanning Area) Versatile Color Palette for Defects Imaging Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects; Gate Manipulation - Rebuild C-, B-, and D-Scan views for various Gate Settings; Statistical Analysis; Slicing and Filtering Images Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Straight Beam Probes to Be Used for Inspection Optional Accessories: S 4010 S 799028 or S 799028 HT S86000 S 554230 AND/OR S 554231 AND/OR S 554232 AND/OR S 554233 MULTISCAN-COMBOS-CU Order Code: SWA 996013 CU Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Area) Showing of Actually Implemented Probe Trace Pulse Echo Amplitude / Distance C-Scan (Top View of Scanning Area either Global or Sliced - switcheable) Pulse Echo B-Scan (Unfolded Side View of the Scanning Area either Global or Sliced - switcheable) Pulse Echo B-Scan (Real Shape Side View of the Scanning Area either Global or Sliced - switcheable)a Pulse Echo D-Scan (End View of the Scanning Area either Global or Sliced - switcheable) Through Transmission / Back Echo Attenualtion Amplitude C-Scan (Top View of Scanning Area) Versatile Color Palette for Defects Imaging Postprocessing: Sizing of defects; Statistical Analysis; Slicing and Filtering Images a Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Straight Beam Probes to Be Used for Inspection S 89000 Optional Accessories: S 4010 S 799028 or S 799028 HT S86000 S 554230 AND/OR S 554231 AND/OR S 554232 AND/OR S 554233 MULTISCAN-COMBOS-CU RD Order Code: SWA 996013 CU RD Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Area) Showing of Actually Implemented Probe Trace Pulse Echo Amplitude / Distance C-Scan (Top View of Scanning Area either Global or Sliced - switcheable) Pulse Echo B-Scan (Unfolded Side View of the Scanning Area either Global or Sliced - switcheable) Pulse Echo B-Scan (Real Shape Side View of the Scanning Area either Global or Sliced - switcheable) Pulse Echo D-Scan (End View of the Scanning Area either Global or Sliced - switcheable) Through Transmission / Back Echo Attenualtion Amplitude C-Scan (Top View of Scanning Area) Versatile Color Palette for Defects Imaging Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects; Gate Manipulation - Rebuild C-, B-, and D-Scan views for various Gate Settings; Statistical Analysis; Slicing and Filtering Images Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B 4060 or S 4060 HT S 70010 or S 70010 HT Probe Holders for Straight Beam Probes to Be Used for Inspection S 89000 Optional Accessories: S 4010 S 799028 or S 799028 HT S86000 S 554230 AND/OR S 554231 AND/OR S 554232 AND/OR S 554233 FLOORMAP - Fast Tank Floor / Shell Inspection for Pitting and Deep Corrosion Damages - Linear and/or Beam Swiveling Scanning with On-Line Image Reconstruction Order Code: SWA 99C034 Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Complete Coverage of the Whole Region Of Ineterst through Non Mechanically Encoded Linear and/or Beam Swiveling Scanning CB-Scan (Top View - of Area of Interest) Versatile Color Palette for Defects Imaging Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects; Gate Manipulation - Rebuild C-, B-, and D-Scan views for various Gate Settings Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040B AND/OR S 2045B S 4050 or S 4050 HT AND/OR S 4060 or S 4060 HT AND/OR S 4055 or S 4055 HT S 70200 or S 70200 HT S 544000 or S 544000 HT Optional Accessories: S 904050 MULTISCAN COMBO SX - extension of MULTISCAN COMBO S for scanning areas of up to 2 X 3 m in one shot feature (planar / quasiplanar objects only) Order Code: SWA 996013 LASC Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Area) Showing of Actually Implemented Probe Trace Pulse Echo Amplitude / Distance C-Scan (Top View of Scanning Area either Global or Sliced - switcheable) Pulse Echo B-Scan (Side View of the Scanning Area either Global or Sliced - switcheable) Pulse Echo D-Scan (End View of the Scanning Area either Global or Sliced - switcheable) Through Transmission / Back Echo Attenuation Amplitude C-Scan (Top View of Scanning Area) Versatile Color Palette for Defects Imaging Postprocessing: Sizing of defects; Statistical Analysis; Slicing and Filtering Images Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B 4060 or S 4060 HT S 70010 or S 70010 HT S 280766 LASC Probe Holders for Straight Beam Probes to Be Used for Inspection Optional Accessories: S 4010 S 799028 or S 799028 HT S86000 S 554230 AND/OR S 554231 AND/OR S 554232 AND/OR S 554233 MULTISCAN COMBO SX RD - extension of MULTISCAN COMBO S RD for scanning areas of up to 2 X 3 m in one shot feature (planar / quasiplanar objects only) with Complete Raw Data Capturing Order Code: SWA 996013 LASC RD Support of all A-Scan types (Full Wave / Neg Wave / Pos Wave rectification; RF) while scanning, recording and imaging defects Support of Linear or DAC- , DGS- , TCG- normalized recording and imaging defects FFT (Frequency Domain Signal Presentation) - additional feature for defects evaluation and / or pattern recognition Testing Integrity / Coverage Imaging (Top View of Probe Manipulation Area) Showing of Actually Implemented Probe Trace Pulse Echo Amplitude / Distance C-Scan (Top View of Scanning Area either Global or Sliced - switcheable) Pulse Echo B-Scan (Side View of the Scanning Area either Global or Sliced - switcheable) Pulse Echo D-Scan (End View of the Scanning Area either Global or Sliced - switcheable) Through Transmission / Back Echo Attenualtion Amplitude C-Scan (Top View of Scanning Area) Versatile Color Palette for Defects Imaging Postprocessing: Off-line Recovery and Play-Back of A-Scans; Echo Dynamic Pattern Recognition; Sizing of defects; Gate Manipulation - Rebuild C-, B-, and D-Scan views for various Gate Settings; Statistical Analysis; Slicing and Filtering Images Comprehensive Setup and Scanning Reporting, Direct Connection To any Type of LPT or LAN Windows Printer Required Accessories: S 4030A or S 4030A HT S 2040 B 4060 or S 4060 HT S 70010 or S 70010 HT S 280766 LASC Probe Holders for Straight Beam Probes to Be Used for Inspection Optional Accessories: S 4010 S 799028 or S 799028 HT S86000 S 554230 AND/OR S 554231 AND/OR S 554232 AND/OR S 554233 Set of additional fixtures and accessories required for scanning of 2X3 m area in one shot (planar / quasiplanar objects only) - required for implementation of MULTISCAN COMBO SX and MULTISCAN COMBO SX RD Inspection SW package Order Code: S 280766 LASC Short pigtail cable (LEMO) for bridging Pulser Receiver Output and Input of ISONIC 2001to Front panel (Jumper LEMO 00 male – LEMO 00 male) Order Code: S 799001 Short pigtail cable (LEMO/BNC) for rear panel commutations - IN FD / IN SIG (Jumper LEMO 00 male – BNC male) - ISONIC 2001 Order Code: S 799002 UDS 3-3 based units - spare part Short pigtail cable (LEMO) for rear panel commutations - IN FD / IN SIG (Jumper LEMO 00 male – LEMO 00 male) - ISONIC 2001 Order Code: S 799007 UDS 3-4 based units - spare part Adapter BNC Male – LEMO 00 female Order Code: S 799012 UDS 3-3 based units - spare part Long Jumper for TOFD implementation (LEMO 00 male – LEMO 00 male) Order Code: S 799017